The ionospheric clutter in High Frequency Surface Wave Radar (HFSWR) is the reflection of electromagnetic waves from the ionosphere back to the receiver, which should be suppressed as much as possible for the primary purpose of target detection in HFSWR. However, ionospheric clutter contains vast quantities of ionospheric state information. By studying ionospheric clutter, some of the relevant ionospheric parameters can be inferred, especially during the period of typhoons, when the ionospheric state changes drastically affected by typhoon-excited gravity waves, and utilizing the time-frequency characteristics of ionospheric clutter at typhoon time, information such as the trend of electron concentration changes in the ionosphere and the direction of the typhoon can be obtained. The results of the processing of the radar data showed the effectiveness of this method.

This paper introduces heuristic approaches and a deep reinforcement learning approach to solve a joint virtual network function deployment and scheduling problem in a dynamic scenario. We formulate the problem as an optimization problem. Based on the mathematical description of the optimization problem, we introduce three heuristic approaches and a deep reinforcement learning approach to solve the problem. We define an objective to maximize the ratio of delay-satisfied requests while minimizing the average resource cost for a dynamic scenario. Our introduced two greedy approaches are named finish time greedy and computational resource greedy, respectively. In the finish time greedy approach, we make each request be finished as soon as possible despite its resource cost; in the computational resource greedy approach, we make each request occupy as few resources as possible despite its finish time. Our introduced simulated annealing approach generates feasible solutions randomly and converges to an approximate solution. In our learning-based approach, neural networks are trained to make decisions. We use a simulated environment to evaluate the performances of our introduced approaches. Numerical results show that the introduced deep reinforcement learning approach has the best performance in terms of benefit in our examined cases.

In this paper, we present a novel photometric compensation network named CASEformer, which is built upon the Swin module. For the first time, we combine coordinate attention and channel attention mechanisms to extract rich features from input images. Employing a multi-level encoder-decoder architecture with skip connections, we establish multiscale interactions between projection surfaces and projection images, achieving precise inference and compensation. Furthermore, through an attention fusion module, which simultaneously leverages both coordinate and channel information, we enhance the global context of feature maps while preserving enhanced texture coordinate details. The experimental results demonstrate the superior compensation effectiveness of our approach compared to the current state-of-the-art methods. Additionally, we propose a method for multi-surface projection compensation, further enriching our contributions.

In this paper, the capacity and error probability of orthogonal space-time block codes (STBCs) are presented for PAM/PSK/QAM modulation in correlated flat fading channels. We consider an equivalent scalar AWGN (additive white Gaussian noise) channel with a channel gain proportional to the Frobenius norm of the matrix channel. A unified approach to the error probability analysis for correlated Rayleigh and Rician fading channels is presented. Closed form error probability expressions are derived for Rayleigh fading channels. We also determine the capacity and probability of error for a multiuser direct sequence code division multiple access (DS-CDMA) system employing a STBC over correlated fading channels.

In the advanced digital terrestrial/television multimedia broadcasting (DTMB-A) standard, a preamble based on distance detection (PBDD) is adopted for robust synchronization and signalling transmission. However, traditional signalling detection method will completely fail to work under severe frequency selective channels with ultra-long delay spread 0dB echoes. In this paper, a novel transmission parameter signalling detection method is proposed for the preamble in DTMB-A. Compared with the conventional signalling detection method, the proposed scheme works much better when the maximum channel delay is close to the length of the guard interval (GI). Both theoretical analyses and simulation results demonstrate that the proposed algorithm significantly improves the accuracy and robustness of detecting the transmitted signalling.

Based on the codewords of the [q,2,q-1] extended Reed-Solomon (RS) code over the finite field Fq, we can construct a regular binary γq×q2 matrix H(γ,q), where q is a power of 2 and γ≤q. The matrix H(γ,q) defines a regular low-density parity-check (LDPC) code C(γ,q), called a full-length RS-LDPC code. Using some analytical methods, we completely determine the values of s(H(4,q)), s(H(5,q)), and d(C(5,q)) in this letter, where s(H(γ,q)) and d(C(γ,q)) are the stopping distance of H(γ,q) and the minimum distance of C(γ,q), respectively.

Data exchange, in which two blocks of data are swapped between cores in distributed memory systems, necessitates additional memory buffer in a multiprocessor system-on-chip. In this paper, we propose a novel bidirectional inter-core communication mechanism called coherent direct memory access (CoDMA). The CoDMA ensures that the writing address is always less than the reading address in coherent read and write mode, so as to avoid read-after-write (RAW) errors. It features an efficient data exchanging scheme without using data buffer in the memory. A four-core single-instruction multiple-data processor is established for the experiments, based on a multi-bus network-on-chip. Experimental results show that the proposed method consumes no additional memory buffer and achieves 39% and 20% average performance improvement compared with traditional Methods 1 and 2, respectively. And a maximal of 43% reduction in memory usage is achieved, at the cost of only 0.22% more area overhead compared with the entire system.

Multi-agent based simulation has been widely used in behavior finance, and several single-processed simulation platforms with Agent-Based Modeling (ABM) have been proposed. However, traditional simulations of stock markets on single processed computers are limited by the computing capability since financial researchers need larger and larger number of agents and more and more rounds to evolve agents' intelligence and get more efficient data. This paper introduces a distributed multi-agent simulation platform, named PSSPAM, for stock market simulation focusing on large scale of parallel agents, communication system and simulation scheduling. A logical architecture for distributed artificial stock market simulation is proposed, containing four loosely coupled modules: agent module, market module, communication system and user interface. With the customizable trading strategies inside, agents are deployed to multiple computing nodes. Agents exchange messages with each other and with the market based on a customizable network topology through a uniform communication system. With a large number of agent threads, the round scheduling strategy is used during the simulation, and a worker pool is applied in the market module. Financial researchers can design their own financial models and run the simulation through the user interface, without caring about the complexity of parallelization and related problems. Two groups of experiments are conducted, one with internal communication between agents and the other without communication between agents, to verify PSSPAM to be compatible with the data from Euronext-NYSE. And the platform shows fair scalability and performance under different parallelism configurations.

This letter proposes an efficient Location-Aware Social Routing (LASR) scheme for Delay Tolerant Networks (DTNs). LASR makes forwarding decisions based on a new metric which uses location information to reflect the node relations and community structure. Simulation results are presented to support the effectiveness of our scheme.

In recent decade, many state-of-the-art algorithms on image classification as well as audio classification have achieved noticeable successes with the development of deep convolutional neural network (CNN). However, most of the works only exploit single type of training data. In this paper, we present a study on classifying bird species by exploiting the combination of both visual (images) and audio (sounds) data using CNN, which has been sparsely treated so far. Specifically, we propose CNN-based multimodal learning models in three types of fusion strategies (early, middle, late) to settle the issues of combining training data cross domains. The advantage of our proposed method lies on the fact that we can utilize CNN not only to extract features from image and audio data (spectrogram) but also to combine the features across modalities. In the experiment, we train and evaluate the network structure on a comprehensive CUB-200-2011 standard data set combing our originally collected audio data set with respect to the data species. We observe that a model which utilizes the combination of both data outperforms models trained with only an either type of data. We also show that transfer learning can significantly increase the classification performance.

Large number of electronic connectors are widely used in various electronic and telecommunication systems. No matter whether it is optical telecommunications or mobile phone systems, connectors are important links for electronics. Unfortunately connector contacts are exposed in air, they are different from any other electronic components, the contacts are greatly influenced by the environment where they operate. In China, dust and corrosion products are the main contaminants to cause contact failure. Evidently the failed contacts seriously deteriorate the reliability of electronic and telecommunication systems. This paper summarizes the recent achievements obtained by our Lab on the effect of dust and corrosion products to the connector contact failure. Since dust contamination is a very complex problem which is not only popular in China, but also happened in many countries. Continuous studies will be very useful to improve the contact reliability of connectors, setting up new and effective testing methods and standards, building up experimental and computer simulation systems.

Real-time matting is a challenging research in deep learning. Conventional CNN (Convolutional Neural Networks) approaches are easy to misjudge the foreground and background semantic and have blurry matting edges, which result from CNN’s limited concentration on global context due to receptive field. We propose a real-time matting approach called RMViT (Real-time matting with Vision Transformer) with Transformer structure, attention and content-aware guidance to solve issues above. The semantic accuracy improves a lot due to the establishment of global context and long-range pixel information. The experiments show our approach exceeds a 30% reduction in error metrics compared with existing real-time matting approaches.

There are two major challenges in wide-band spectrum sensing in a heterogenous spectrum environment. One is the spectrum acquisition in the wide-band scenario due to limited sampling capability; the other is how to collaborate in a heterogenous spectrum environment. Compressed spectrum sensing is a promising technology for wide-band signal acquisition but it requires effective collaboration to combat noise. However, most collaboration methods assume that all the secondary users share the same occupancy of primary users, which is invalid in a heterogenous spectrum environment where secondary users at different locations may be affected by different primary users. In this paper, we propose an automatic clustering collaborative compressed spectrum sensing (ACCSS) algorithm. A hierarchy probabilistic model is proposed to represent the compressed reconstruction procedure, and Dirichlet process mixed model is introduced to cluster the compressed measurements. Cluster membership estimation and compressed spectrum reconstruction are jointly implemented in the fusion center. Based on the probabilistic model, the compressed measurements from the same cluster can be effectively fused and used to jointly reconstruct the corresponding primary user's spectrum signal. Consequently, the spectrum occupancy status of each primary user can be attained. Numerical simulation results demonstrate that the proposed ACCSS algorithm can effectively estimate the cluster membership of each secondary user and improve compressed spectrum sensing performance under low signal-to-noise ratio.

In this letter, we study the performance of multi-antenna relay networks with limited feedback beamforming in decode-and-forward (DF) relaying. Closed-form expression for both outage probability and symbol error rate are derived by using the moment generation function (MGF) of the combined signal-to-noise ratio (SNR) at the destination. Subjected to a total power constraint, we also explore adaptive power allocation between source and relay to optimize the performance. Simulations are given to verify the correctness of our theoretical derivations. Results show that the proposed adaptive power allocation solution significantly outperforms the uniform power allocation method.

The high-resolution frequency estimators most commonly used, such as Least Square (LS) method based on AR model, MVSE, MUSIC and ESPRIT, determine estimates of the sinusoidal frequencies from the sample noise-corrupted data. In this paper, a new frequency estimation method named Pole-Placement Least Square (PPLS) is presented, which is a modified LS method with a certain number of model poles restricted to the unit circle. The statistical performance of PPLS is studied numerically, and compared with the Cramer-Rao bound as well as the statistical performance corresponding to the LS methods. PPLS is shown to have higher resolution than the conventional LS method. The relationship between poles location and its resolution is also discussed in detail.

A 12×16-element corporate-feed slot array is presented. The corporate-feed circuit for the 12×16-elemtent array consists of cross-junctions and asymmetric T-junctions, whereas the conventional one is limited to arrays of 2m×2n slots by its use of symmetric T-junctions. Simulations of the 12×16-element array show a 7.6% bandwidth for reflection less than -14dB. A 31.7-dBi gain with an antenna efficiency of 82.6% is obtained at the design frequency of 61.5GHz. The 12×16-element array is fabricated by diffusion bonding of laminated thin metal plates. Measurements indicate 31.1-dBi gain with 71.9% antenna efficiency at 61.5GHz.

In this paper, we address the problem of non-parametric template matching which does not assume any specific deformation models. In real-world matching scenarios, deformation between a template and a matching result usually appears to be non-rigid and non-linear. We propose a novel approach called local rigidity constraints (LRC). LRC is built based on an assumption that the local rigidity, which is referred to as structural persistence between image patches, can help the algorithm to achieve better performance. A spatial relation test is proposed to weight the rigidity between two image patches. When estimating visual similarity under an unconstrained environment, high-level similarity (e.g. with complex geometry transformations) can then be estimated by investigating the number of LRC. In the searching step, exhaustive matching is possible because of the simplicity of the algorithm. Global maximum is given out as the final matching result. To evaluate our method, we carry out a comprehensive comparison on a publicly available benchmark and show that our method can outperform the state-of-the-art method.

In this paper, we address the problem of projective template matching which aims to estimate parameters of projective transformation. Although homography can be estimated by combining key-point-based local features and RANSAC, it can hardly be solved with feature-less images or high outlier rate images. Estimating the projective transformation remains a difficult problem due to high-dimensionality and strong non-convexity. Our approach is to quantize the parameters of projective transformation with binary finite field and search for an appropriate solution as the final result over the discrete sampling set. The benefit is that we can avoid searching among a huge amount of potential candidates. Furthermore, in order to approximate the global optimum more efficiently, we develop a level-wise adaptive sampling (LAS) method under genetic algorithm framework. With LAS, the individuals are uniformly selected from each fitness level and the elite solution finally converges to the global optimum. In the experiment, we compare our method against the popular projective solution and systematically analyse our method. The result shows that our method can provide convincing performance and holds wider application scope.

In this letter, we propose a new intra-field deinterlacing algorithm based on an edge dependent weighted filter (EDWF). The proposed algorithm consists of three steps: 1) calculating the gradients of three directions (45°, 90°, and 135°) in the local working window; 2) achieving the weights of the neighboring pixels by exploiting the edge information in the pixel gradients; 3) interpolating the missing pixel using the proposed EDWF interpolator. Compared with existing deinterlacing methods on different images and video sequences, the proposed algorithm improves the peak signal-to-noise-ratio (PSNR) while achieving better subjective quality.

This paper describes a method to evaluate the modulated waveforms output by a high-speed external phase modulator over a wide wavelength range by using linear optical sampling (LOS) and a wavelength-swept light source. The phase-modulated waveform is sampled by LOS together with the reference signal before modulation, and the modulation waveform is observed by removing the phase noise of the light source extracted from the reference signal. In this process, the frequency offset caused by the optical-path length difference between the measurement and reference interferometers is removed by digital signal processing. A pseudo-random binary-sequence modulated signal is observed with a temporal resolution of 10ps. We obtained a dynamic range of ∼40dB for the measurement bandwidth of 10 nm. When the measurement bandwidth is expanded to entire C-Band (∼35nm), the dynamic ranges of 37∼46dB were observed, depending on the wavelengths. The measurement time was sub-seconds throughout the experiment.